This product is formulated to complement swimming pool water being treated with the BioGuard SoftSwim System. It is effective against the growth of algae. The wetting agent in this product allows it to penetrate small crevices where agae is likely to form. This product is efficient and non-staining when used as directed. This product will not evaporate and its algae fighting abilites actually increase as pool water temperature incrases. The residual effectiveness of this product tends to stabilize the total chemical treatment system. This product may foam and therefore should not be used for spa treatment or in pools with attached spas or jetted returns.
- Add it to your pool every two weeks to keep algae in check.
- Withstands evaporation from direct sunlight
- Works harder in high temperatures
- Supports the effectiveness of other SoftSwim products when used on a regular basis.
Available Sizes:
DIRECTIONS FOR USE:
Read entire label and use strictly in accordance with precautionary statements and directions.
Ensure all pool equipment is working properly. Backwash the filter system following manufacturer’s directions. Adjust pH to between 7.2-7.6. Check for metals and if present add a stain and scale inhibitor to prevent staining of pool surface due to metals. When using other products as outlined in directions for this product, always follow directions on those products. Wait at least 15 minutes after application before entering pool.
For an Initial Application or when Pool Water is Changed: Pour 32 fluid ounces (4 ppm) directly into pool per 25,000 gallons of water.
For Routine Maintenance: For weekly application intervals, use 1 fluid ounce per 5,000 gallons of water (0.5 ppm). For two week application intervals, use 2 fluid ounces per 5,000 gallons of water (1 ppm) every other week. Following heavy rain showers, add an additional 1 fluid ounce per 5,000 gallons.
|