|  You’ll love everything about
the Mineral Springs system. For starters, it’s almost
"hands-off," and takes only a few minutes a week to maintain. In
fact, once you’ve begun the system, you only have to add the Renewal® product
once a week. That’s it!
The Mineral Springs system is
perfect for frequent travelers or vacation-takers. Through proper use of the
system, you can leave home and forget your pool while you enjoy your trip. Even
better, with Renewal you can add advanced applications for weeks ahead.
This system works for you!
The Mineral Springs system utilizes easy-to-apply
minerals and an automatic device to produce a chlorine
sanitizer: 
Beginnings®
A proprietary
blend of minerals added to pool water at start-up
Renewal®
Helps to
replenish mineral levels, keeping water soft and clear
The Mineral Springs Unit [Controller and Cell]
Utilizes
Beginnings and Renewal products to produce a chlorine sanitizer.
The
Process
Essential elements pass through the Mineral Springs cell to produce
sanitizer. The minerals are converted into free chlorine that kills bacteria
and algae in the pool. The cell, along with the flow detector, are plumbed into
the pool return line piping. The flow switch/detector informs the controller
that water is flowing and that the generation process can start. The
temperature and mineral level sensors keep the Mineral Springs controller
calibrated regardless of pool temperature.  Beginnings
Adds BioGuard’s proprietary
blend of elements and stable minerals to water, creating a total mineral
bathing environment. You’ll notice the difference immediately.
Usage requires minerals to be
present in pool water. Apply one bag per 1,000 gallons of pool water at start-up
or as needed to obtain proper mineral
levels.
 Renewal
Replenishes lost mineral
levels and rejuvenates the Mineral Springs® system. Renewal® contains pH balancers
and adjusters to offset pH drift including chelants and scale inhibitors. This
helps prolong the life span of the Mineral Springs electrolytic cell. Renewal
also contains a filter aid and helps in maintaining crystal clear
water.
Apply one bag per 20,000
gallons weekly to replenish mineral
levels.
Mineral
Springs Units BioGuard® currently offers 5
Mineral Springs® units to meet the needs of all pool types–in-ground,
above-ground; large or small.
MS-10 and
MS-11
Treat in-ground residential
pools up to 40,000 gallons or commercial pools up to 25,000 gallons. The MS-10
model can be hardwired either 120 VAC or 240 VAC. The MS-11 model is a 120 VAC
with a line cord for a GFI outlet.
MS-20, MS-22 and
MS-23
Treat above-ground pools up to 18,000 gallons. The MS-20 and
MS-22 models are 120 VAC with a line cord for a GFI outlet. The MS-23 model is
a 120 VAC with a line cord, but contains a twist lock plug. [The electrical
code in some areas of the US requires this type of plug.] The MS-22 and MS-23
are installed directly to the return jet.
NOTE: While any of
these models may be installed on above-ground pools, final selection is based
upon plumbing set-up.
Unit Features:
- Adjustable dial to regulate electrolytic generation of sanitizer
- Sanitizer boost button ensuring
production of sanitizer for 24 hours while pump is operating or until power is
turned off
- Self-cleaning mechanism to avoid scale
build-up
- Low mineral shut-off to protect cell if
mineral residual drops below recommended level
- UL approved
- In-ground models interface with Jandy Aqua Link System and are
NSF-listed
- Aboveground/small pool models contain a
24-hour time clock to control filter pump
- 5-year
|