SpaGuard Calcium Hardness Increaser

$7.59

SpaGuard Calcium Hardness Increaser raises calcium hardness in spa and hot tub water. The desired calcium hardness level in spa water should be 100-200 ppm (parts per million). Low calcium hardness, below 100 ppm, could cause spa water to be corrosive which may damage spa surfaces and equipment. SpaGuard’s Calcium Hardness Increaser enables spa owners to increase their calcium hardness with this easy to use granular formula, which will boost your calcium hardness to above the danger zone, where low levels cause extensive corrosion of plumbing, jets, fixtures, and tub surfaces. Calcium Hardness Increaser helps raise the calcium level steadily so you don’t get too much calcium and start developing scale build-up and cloudy water. The optimal calcium hardness level is 200-400 ppm, while anything below 100 ppm will cause corrosion.

Description

SpaGuard Calcium Hardness Increaser

SpaGuard Calcium Hardness Increaser raises calcium hardness in spa and hot tub water. The desired calcium hardness level in spa water should be 100-200 ppm (parts per million). Low calcium hardness, below 100 ppm, could cause spa water to be corrosive which may damage spa surfaces and equipment. SpaGuard’s Calcium Hardness Increaser enables spa owners to increase their calcium hardness with this easy to use granular formula, which will boost your calcium hardness to above the danger zone, where low levels cause extensive corrosion of plumbing, jets, fixtures, and tub surfaces. Calcium Hardness Increaser helps raise the calcium level steadily so you don’t get too much calcium and start developing scale build-up and cloudy water. The optimal calcium hardness level is 200-400 ppm, while anything below 100 ppm will cause corrosion.

Balance your water to prevent problems. SpaGuard spa water balancers control scale, adjust pH and total alkalinity and correct mineral imbalances. Keeping the right balance of your spa water is necessary. How important is pH really? Having the correct pH level in your spa is crucial to your soakers’ comfort and also protects your equipment from corrosion and scale. The ideal pH is 7.2-7.6. If the pH is too high or too low it can cause those pesky red, itchy eyes!

Specifications

  • Helps prevent corrosion of plumbing, jets and fixtures
  • Prevents degradation of spa surfaces
  • Prevents scale build up
  • Helps prevent cloudy water
  • Easy to use granular formula
  • Dosing: 1 tbsp (2 capfuls)  per 100 gallons increases calcium hardness 25 ppm
  • Use an accurate test method to determine alkalinity of water
  • Use chart on bottle and alkalinity test results to determine the required dosage
  • Calcium hardness levels should be between 100-200 ppm
  • Pour directly into water with pump on high for 30 minutes
  • 12 oz. (.75 lbs) 340 mL
  • 42636BIO
  • Check out more spa cleaning products here

*For spas using the BioGuard Soft Soak program, adjust the calcium hardness level to maintain 200-300 ppm

Additional information

Weight 0.75 lbs
Dimensions 3 × 3 × 8.5 in

You may also like…