All Three Flavors are Flying Out the Door
It’s hot, and it’s more important than ever to pay attention to your water chemistry. All three flavors of Balance Pak are flying out the door! Check out this article as we look at the importance and usage of Balance Pak 100, Balance Pak 200, and Balance Pak 300.
These three products are what we call increasers. They are integral to the care of your pool and the balance of your pool water.
Each one has a special job in your swimming pool. We always recommend you bring us a water sample, so we can tell you which products will be beneficial to your swimming pool. Let’s look at what each product is used for.
BioGuard Balance Pak 100 for Total Alkalinity
This product:
- Raises your total alkalinity
- Prevents pH change
- Prevents corrosion and vinyl liner wrinkling due to improper pH
- Dissolves quickly when added directly to water
BioGuard Balance Pak 200 for pH
This product:
- Raises your pH level
- Protects pool equipment from corrosion
- Prevents eye irritation due to low pH
BioGuard Balance Pak 300 for Calcium Hardness
This product:
- Raises your calcium hardness levels
- Dissolves quickly
- Protects pool equipment from corrosion, plaster etching, and wrinkling of liners
Balancing Your Pool Water is Key
All summer long, and especially when it is hot, it is key to keep your pool water in balance. This refers to your pH levels, your total alkalinity, and your calcium hardness. Balance Pak 100, 200, and 300 are key because they not only control the scale and adjust your pH and total alkalinity, but they also prevent metallic stains and correct mineral imbalance.
We can’t emphasize enough how important water chemistry is. It keeps your pool crystal clear and comfortable for swimmers. Proper water balance protects your surfaces and your equipment.
Finally, if you have any questions about these three products, please come see us today! Don’t forget to bring us a water sample so we can run it through our ALEX system (for free!) and tell you just what you need!